It only takes something to go wrong for us to take concern over our bathroom and toilet. If you have a clogged toilet in your home and are in no mood to pay a hefty amount to a plumber, this post is for you. In here, you’ll find five steps to fix a clogged or overflowing toilet all by yourself.

Here are the five steps you need to take for ensuring a smoothly functioning toilet in your home:

1. Stopping the overflow is the primary aim

If a lot of water is getting overflown from your toilet, the situation is dense. Firstly, you need to find a way to cut the water supply to the tank. Before that, take out the lid from the toilet seat. Use the flapper and stop the water.

This overflowing water can cause a lot of issues in your bathroom. They can make the floor area greasy due to microorganisms. A rapant cleaning of the bathroom and the floor will be required to deal with the after-effects.

2. You’ll need a plunger for this

Now, some dirty work. You’ll need a bathroom plunger to remove the clog. The bathroom plunger is different from a sink plunger, so do not get confused. A sink plunger won’t be able to make enough suction force to remove a toilet clog.

Take the plunger to the toilet and use the handle to adjust and safely cover the toilet drain. Now use it back and forth to create suction. This, most certainly, should remove the clog.

3. Get an Enzyme Cleaner


For the clogs which are not easily removed, Enzyme cleaners will do the work. It should be noted though liquid chemical enzymes are useful, they can be bad for bathroom plumbing too. Use in moderation will prevent any future plumbing issue. You can find some of the best chemical cleaners from your nearest home need stores.

4. Make a homemade drain cleaner

If you want your toilet pot to be clog-free and shining for a long time, you must make a drain cleaner which is super easy to make. You will need some hot water (half a gallon at least), some baking soda and vinegar. Boil the water. Put some baking soda and vinegar in the toilet pot. Put the hot water above everything. Give it overnight to work its magic.

5. Use a wire coat hanger to build a clog remover

A wire coat hanger can be used as a clog removing tool, if you have no other choice. Use a wire cutter to straighten the coat hanger. Wrap one end of the wire with an old cloth and use tape to keep it in place. Now put the wire down to the drain and push it as far as it can go. Twist and turn the hanger to remove clogs from the drain. Always wear a pair of rubber hand gloves when you do this kind of cleaning.

For any kind of plumbing help, please visit www.drainrescueplumbers.com and get your issue solved within no time!

Leave a Reply

Your email address will not be published. Required fields are marked *